02214: Difference between revisions

Revision as of 12:48, 18 March 2013

When found in Seat Exeo (3R): Tire Pressure Monitoring II, perform System Reset.
- Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
- Switch the Ignition OFF.
- Clear/check Fault Codes and check/correct the Tire Pressure.
- Switch the Ignition ON.
- Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
When found in VW Golf (1K) or similar: Brake Electronics (MK60), perform System Reset
When found in VW Golf (1K) or similar: Brake Electronics (MK70), perform System Reset
When found in VW Passat (3C): Brake Electronics, perform System Reset

@@ Line 16: / Line 16: @@
 * When found in [[Seat Exeo (3R)]]: Tire Pressure Monitoring II, perform System Reset.
 ** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
-** Once the Calibration has been performed clear/check Fault Codes and check the Tire Pressure.
+** Switch the Ignition OFF.
+** Clear/check Fault Codes and check/correct the Tire Pressure.
+** Switch the Ignition ON.
 ** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
 * When found in [[VW Golf/Jetta/Bora (1K/5M)|VW Golf (1K)]] or similar: [[VW Golf (1K) Brake Electronics (MK60)|Brake Electronics (MK60)]], perform [[VW Golf (1K) Brake Electronics (MK60)#Tire Pressure Monitoring System Reset|System Reset]]