Difference between revisions of "01273"
From Ross-Tech Wiki
| Line 17: | Line 17: | ||
** Perform Output Test (Check Air Vents while Blower is active) | ** Perform Output Test (Check Air Vents while Blower is active) | ||
* Check wiring and connectors | * Check wiring and connectors | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | * When found in Audi A4/A5/Q5 (8K/8T/8R) models: | ||
| + | ** North American Market (NAR) vehicles, see TPI 2033596/3 (or newer) | ||
| + | ** RoW vehicles, see TPI 2022372/2 (or newer) | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 13:13, 14 August 2014
01273 - Fresh Air Blower (V2)
Possible Causes
- Fresh Air Blower (V2) defective
- Control Module for Fresh Air Blower (J126) defective
- Short of open circuit in wiring to Fresh Air Blower (V2)
- Climatronic Control Module (J255) malfunctioning
Possible Solutions
- Check Fresh Air Blower (V2)
- Perform Output Test (Check Air Vents while Blower is active)
- Check Meas. Blocks while Blower is active
- Check Control Module for Fresh Air Blower (J126)
- Perform Output Test (Check Air Vents while Blower is active)
- Check wiring and connectors
Special Notes
- When found in Audi A4/A5/Q5 (8K/8T/8R) models:
- North American Market (NAR) vehicles, see TPI 2033596/3 (or newer)
- RoW vehicles, see TPI 2022372/2 (or newer)