Difference between revisions of "02546"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| Line 15: | Line 15: | ||
** Make sure the Ignition is ON and the Engine is Running. | ** Make sure the Ignition is ON and the Engine is Running. | ||
** Center Steering Wheel (±10°) and hold it centered for about 5 Seconds. | ** Center Steering Wheel (±10°) and hold it centered for about 5 Seconds. | ||
| − | ** Turn Steering Wheel completely to the Left and hold there for about | + | ** Turn Steering Wheel completely to the Left and hold there for about 10 Seconds. |
| − | ** Turn Steering Wheel completely to the Right and hold there for about | + | ** Turn Steering Wheel completely to the Right and hold there for about 10 Seconds. |
** Center Steering Wheel (±10°). | ** Center Steering Wheel (±10°). | ||
** Switch Engine and Ignition OFF. | ** Switch Engine and Ignition OFF. | ||
Revision as of 13:32, 11 March 2015
02546 - Steering Limit Stop: No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Steering Assist OFF
Possible Causes
- No or Incorrect Basic Setting / Adaptation
Possible Solutions
- Perform Steering Limit Stop Adaptation
- Make sure the Ignition is ON and the Engine is Running.
- Center Steering Wheel (±10°) and hold it centered for about 5 Seconds.
- Turn Steering Wheel completely to the Left and hold there for about 10 Seconds.
- Turn Steering Wheel completely to the Right and hold there for about 10 Seconds.
- Center Steering Wheel (±10°).
- Switch Engine and Ignition OFF.
- Switch Ignition ON.
- Wait about 5 Seconds.
- Steering Assist Warning Lamp should turn OFF (If it doesn't, perform a short Test Drive).