Difference between revisions of "VW Fox (5Z) Comfort System"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| Line 3: | Line 3: | ||
== Adaptation == | == Adaptation == | ||
=== Channel 011: Remote Control Matching === | === Channel 011: Remote Control Matching === | ||
| − | The following procedure is used to match remote controls, only one remote can be matched at | + | The following procedure is used to match remote controls, only one remote can be matched at a time. If you want to adapt more than one you have to repeat the whole procedure. |
| + | |||
| + | 2 vehicle keys may be required so one can remain ON in the ignition while the other one is used to operate the door lock. | ||
| + | |||
* Save a new value of 0 to initiate the process. | * Save a new value of 0 to initiate the process. | ||
* Put the Key/Remote you want to match in the Driver Door Lock. | * Put the Key/Remote you want to match in the Driver Door Lock. | ||
Latest revision as of 10:26, 29 January 2016
Coding
Adaptation
Channel 011: Remote Control Matching
The following procedure is used to match remote controls, only one remote can be matched at a time. If you want to adapt more than one you have to repeat the whole procedure.
2 vehicle keys may be required so one can remain ON in the ignition while the other one is used to operate the door lock.
- Save a new value of 0 to initiate the process.
- Put the Key/Remote you want to match in the Driver Door Lock.
- Move the Key/Remote to the Open Position and hold it there.
- Press the Close button on the Remote and hold it for 3 Seconds.
- The car should now Lock and Unlock, which confirms the successful matching.