Difference between revisions of "17931/P1523/005411"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == 17931/P1523/005411 - Crash Signal from Airbag Controller: Implausible Signal == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON ==== Possible Causes =...) |
|||
Line 13: | Line 13: | ||
* Check Wiring and/or Connector(s) from/to Airbag Control Module (J234) | * Check Wiring and/or Connector(s) from/to Airbag Control Module (J234) | ||
+ | |||
+ | ==== Special Notes ==== | ||
+ | |||
+ | * When found in early Audi models that use a primitive "crash signal" wire that's spliced to the 01-Engine, 15-Airbags, 35-Cent Locking/46-Cent. Comfort module search the wiring diagrams to see if the dash mounted E3 (4-way hazard/emergency flasher switch) is on that same splice. A faulty E3 (hazard) switch on a "crash signal" circuit can cause this fault code in vehicles such as the (8N) TT and similar. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] |
Revision as of 10:27, 13 February 2018
17931/P1523/005411 - Crash Signal from Airbag Controller: Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Wiring and/or Connector(s) from/to Airbag Control Module (J234) faulty
Possible Solutions
- Check Wiring and/or Connector(s) from/to Airbag Control Module (J234)
Special Notes
- When found in early Audi models that use a primitive "crash signal" wire that's spliced to the 01-Engine, 15-Airbags, 35-Cent Locking/46-Cent. Comfort module search the wiring diagrams to see if the dash mounted E3 (4-way hazard/emergency flasher switch) is on that same splice. A faulty E3 (hazard) switch on a "crash signal" circuit can cause this fault code in vehicles such as the (8N) TT and similar.