Difference between revisions of "16684/P0300/000768"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| Line 26: | Line 26: | ||
* This DTC indicates that one or multiple cylinders are misfiring, but the ECU fails to identify the cylinder. | * This DTC indicates that one or multiple cylinders are misfiring, but the ECU fails to identify the cylinder. | ||
| + | * When found in 2008-2013 A3, TT and 2009-2013 A4, A5, Q5 and A6 vehicles with the 2,0l TFSI (EA888) engines it maybe necessary to Reset the Misfire Adaptions. | ||
| + | ** To Reset Misfire Adaptions: As per TSB [01 13 73] | TPI [2033223], clear the 01-Engine fault codes three times in a row in less than 30 seconds "to remove the programed values." | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 08:49, 9 September 2019
16684/P0300/000768 - Random/Multiple Cylinder Misfire Detected
Possible Causes
- Air Intake System leaking
- Fuel Supply faulty
- Injector(s) faulty
- Ignition Cable(s) and/or Spark Plug(s) faulty
- Ignition Coil(s) faulty
- Exhaust Gas Recirculation (EGR) Valve (N18) stuck/open
- Camshaft Position Sensor (G40) faulty
Possible Solutions
- Check Misfire Recognition
- Check Air Intake System
- Check Fuel Supply
- Check Injector(s) and Injector Sealing
- Check Ignition Cable(s) and Spark Plug(s)
- Check Ignition Coil(s)
- Check Exhaust Gas Recirculation (EGR) Valve (N18)
- Check Camshaft Position Sensor (G40)
Special Notes
- This DTC indicates that one or multiple cylinders are misfiring, but the ECU fails to identify the cylinder.
- When found in 2008-2013 A3, TT and 2009-2013 A4, A5, Q5 and A6 vehicles with the 2,0l TFSI (EA888) engines it maybe necessary to Reset the Misfire Adaptions.
- To Reset Misfire Adaptions: As per TSB [01 13 73] | TPI [2033223], clear the 01-Engine fault codes three times in a row in less than 30 seconds "to remove the programed values."