Difference between revisions of "B2010"

Revision as of 16:04, 19 June 2020

When found in the VW Touareg (7P) Trunk Electronics 6D control module perform the Rear Lid relearn.
When found in the VW Touareg (7P) Parking Brake 53 control module review the following forum post:
- https://forums.ross-tech.com/showthread.php?23560
When found in the BA-Motor Mounts (J931) control module (typically in conjunction with B2005) on 4G Chassis S6/S7/RS7 with 4.0T engine see:
- NAR (North American) Market TPI 2036392
- RoW (Rest of World) Market TPI 2036309
  - Those TPIs discuss Audi SVM code BAA001 for the flash update in addition to a mechanical adjustment and Basic Setting procedure. The RoW document includes the S8 model.
When found in an UDS EPB system, perform Basic Settings Start of operations.
When found in RoW market UDS protocol 17-Instrument clusters, check the service related Adaptation channels. This thread should add clarity: https://forums.ross-tech.com/showthread.php?1874-Audi-Q3-fault-code-1048578-No-Basic-Setting

@@ Line 14: / Line 14: @@
 * When found in the [[VW Touareg (7P) Trunk Electronics]] 6D control module perform the Rear Lid relearn.
+* When found in the [[VW Touareg (7P) Parking Brake]] 53 control module review the following forum post:
+** https://forums.ross-tech.com/showthread.php?23560
 * When found in the BA-Motor Mounts (J931) control module (typically in conjunction with [[B2005]]) on [[Audi A6/S6/RS6/allroad (4G/FC) | 4G Chassis]] S6/S7/RS7 with 4.0T engine see:
 ** NAR (North American) Market TPI 2036392