Difference between revisions of "18436/P2004/008196"

Revision as of 14:10, 18 March 2021

Replaced failed vacuum line
Check Intake Manifold Runner Position Sensor 1 (G336) and wiring, see repair manual
Check Intake Manifold Flap
- Use Output Test
- Perform Basic Setting (Switch Ignition OFF between Output Test and Basic Setting)

When found in Engine: 2.0l TFSI
- Perform Basic Setting.
- Check TPL 2016420 (RoW)
  - Check Engine Control Module Software Version, if necessary perform Update.
  - Replace Intake Manifold Runner (V157) with updated part.
- Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
  - Check Engine Control Module Software Version, if necessary perform Update.
  - Replace Intake Manifold Runner (V157) with updated part.
  - Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.
When found in 2012-2016 Audi with 3.0 TFSI, please see TPI 2050329
- Vacuum operated water pump may draw excessive vacuum causing intake manifold flaps to malfunction. Updated vacuum hose for water pump.
  - https://static.nhtsa.gov/odi/tsbs/2018/MC-10133286-9999.pdf NHTSA

@@ Line 27: / Line 27: @@
 *** Replace Intake Manifold Runner (V157) with updated part.
 *** Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.
+* When found in 2012-2016 Audi with 3.0 TFSI, please see TPI 2050329
+** Vacuum operated water pump may draw excessive vacuum causing intake manifold flaps to malfunction. Updated vacuum hose for water pump.
+*** https://static.nhtsa.gov/odi/tsbs/2018/MC-10133286-9999.pdf  NHTSA
 [[Category:Fault Codes]]