00515

00515 - Camshaft Position (Hall) Sensor (G40)

00515 - Camshaft Position (Hall) Sensor (G40): No Signal

Possible Causes

• Wiring to Camshaft Position (Hall) Sensor (G40) faulty
• Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

• Check Wiring to Camshaft Position (Hall) Sensor (G40)
• Check/Replace Camshaft Position (Hall) Sensor (G40)
• Check/Replace Engine Control Module

Special Notes

• Some older engines store this code as long as the engine is not running, if in doubt read fault codes with the engine running again.

00515 - Camshaft Position (Hall) Sensor (G40): Implausible Signal

Possible Causes

• Camshaft Timing Out of Specification
• Wiring to Camshaft Position (Hall) Sensor (G40) faulty
• Camshaft Position (Hall) Sensor (G40) faulty
• Engine Control Module faulty

Possible Solutions

• Check Camshaft Timing
• Check Wiring to Camshaft Position (Hall) Sensor (G40)
• Check/Replace Camshaft Position (Hall) Sensor (G40)
• Check/Replace Engine Control Module

00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus

Possible Causes

• Wiring to Camshaft Position (Hall) Sensor (G40) faulty
• Camshaft Position (Hall) Sensor (G40) Installation faulty
• Camshaft Timing Out of Specification
• Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

• Check Wiring to Camshaft Position (Hall) Sensor (G40)
• Check/Replace Camshaft Position (Hall) Sensor (G40)
• Check Camshaft Timing
• Check/Replace Engine Control Module

00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground

Possible Symptoms

• Power Loss
• Emissions not OK
• High Fuel Consumption

Possible Causes

• Wiring to Camshaft Position (Hall) Sensor (G40) faulty
• Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

• Check Wiring to Camshaft Position (Hall) Sensor (G40)
• Check/Replace Camshaft Position (Hall) Sensor (G40)