01130

From Ross-Tech Wiki
Revision as of 06:49, 14 November 2011 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

01130 - ABS Operation

01130 - ABS Operation: Implausible Signal

Possible Causes

  • Fuse(s) faulty
  • Modifications/Retrofits incompatible
  • Wiring from/to Brake Electronics Control Module (J104) faulty
    • Electrical Interference from External Sources
      • High Frequency Radiation (e.g. non-insulated Ignition Cable)
  • Brake Electronics Control Module (J104) faulty

Possible Solutions

  • Check Fuse(s)
  • Check Vehicle for Modifications/Retrofits
    • Temporarily remove Modifications/Retrofits (including Wiring)
  • Check Wiring from/to Brake Electronics Control Module (J104)
  • Check Brake Electronics Control Module (J104)

Special Notes

  • This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph).
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=01130&oldid=6359"