D A N A

From Ross-Tech Wiki
Revision as of 01:49, 12 February 2011 by Dana (talk | contribs)

This is my test page please leave it alone ;-)

Red

A0A0A0

  1. C0C0C0

D0D0D0 FFFFFF


This chart shows what information is needed to perform each procedure. The requirements and steps differ depending on whether the component you are installing is brand new, or if it has been previously matched to a vehicle. Used keys are ones that have previously been matched to a different vehicle.




space Immo 1 & 2 Immo 3 Immo 4A Immo 4C
Key Matching (New)
Vehicle SKC
Needed
Vehicle SKC
Needed
Vehicle SKC
Needed
Key Matching (Used)
Vehicle SKC
Needed
Not Possible Not Possible Not Possible
ECU Swapping (New)
No SKC needed
see note
Vehicle SKC Needed Vehicle SKC Needed -
ECU Swapping (Used) No SKC needed
see note
- - -
Cluster Swapping (New) - - - -
Cluster Swapping (Used) - - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -



This is
a table


An example table
First header Second header
upper left   right side
lower left lower middle
A table in a table
[[1]] File:Wiki.png

Two Wikimedia logos


http://meta.wikimedia.org/wiki/Help:Table