User:Dana

This is my test page please leave it alone ;-)

A0A0A0

C0C0C0

D0D0D0 FFFFFF

File:File.jpg to use the full version of the file

File:File.png
alt text
to use a 200 pixel wide rendition in a box in the left margin with 'alt text' as description

Media:File.ogg for directly linking to the file without displaying the file

This chart shows what information is needed to perform each procedure. The requirements and steps differ depending on whether the component you are installing is brand new, or if it has been previously matched to a vehicle. Used keys are ones that have previously been matched to a different vehicle.

space	Immo 1 & 2	Immo 3	Immo 4A	Immo 4C
Key Matching (New)	Vehicle SKC Needed	Vehicle SKC Needed	Vehicle SKC Needed
Key Matching (Used)	Vehicle SKC Needed	Not Possible	Not Possible	Not Possible
ECU Swapping (New)	No SKC needed see note	Vehicle SKC Needed	Vehicle SKC Needed	-
ECU Swapping (Used)	No SKC needed see note	-	-	-
Cluster Swapping (New)	-	-	-	-
Cluster Swapping (Used)	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-

This	is
a	table

An example table

First header

Second header

upper left

right side

lower left

lower middle

*A table in a table*
[[1]]	File:Wiki.png
Two Wikimedia logos

http://meta.wikimedia.org/wiki/Help:Table


0xxxxxxx	1	1	1	1
x0xxxxxx	1	1	1	1
xx0xxxxx	1	1	1	1
xxx0xxxx	1	1	1	1
xxxx0xxx	1	1	1	1
xxxxx0xx	1	1	1	1
xxxxxx0x	1	1	1	1
xxxxxxx0	1	1	1	1

Measuring Block Group 066 Field 2 Data
0xxxxxxx	0	1	0	1	0	1	0	1	0 =	1 =
x0xxxxxx							-		0 =	1 =
xx0xxxxx									0 =	1 =
xxx0xxxx									0 =	1 =
xxxx0xxx									0 =	1 =
xxxxx0xx									0 =	1 =
xxxxxx0x									0 =	1 =
xxxxxxx0									0 = Normal CCS	1 = Accel. pedal overide

Measuring Block Group 066 Field 4 Data
0xxxxxxx	0	1	0	1	0	1	0	1
x0xxxxxx
xx0xxxxx
xxx0xxxx
xxxx0xxx
xxxxx0xx									0 =	1 =
xxxxxx0x									0 =	1 =
xxxxxxx0									0 = Normal CCS	1 = Accel. pedal overide

0	1	0	1	1	1	0	1	0 = Brake Not Depressed	1 = Brake depressed (brake light switch)
								0 = Brake Not Depressed	1 = Brake depressed (brake pedal switch)
								0 = Clutch Not Depressed	1 = Clutch Depressed (always 1 in Auto. Trans.)
								0 = CCS Not active in ECM	1 = CCS active in ECM
								N/A	N/A
								N/A	N/A
								0 = Accel. pedal overide	1 = CCS Operating
								0 = Normal CCS	1 = Accel. pedal overide

Reading Roof Electronics Switch Conditions, Electric Power Top

Measuring Block Group 001
Field 2								X	Field 3							Data
1	1	0	1	1	0	1	0		1	0	X	0	1	1	0	F201
																F290
																F293
																F200
																X
																Not used, always "0"
																F292
																X
																F171
																F202
																F294
																F295
																F172
																Switch Point for Bow UP
																Switch Point for Bow OPEN
																Switch Point for Bow DEAD CENTER