VW Jetta (AJ/16) Manual Heating/Air Conditioning

From Ross-Tech Wiki
Revision as of 14:32, 2 January 2015 by Peter (talk | contribs) (→‎Basic Setting)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Coding

This module does not support coding!

Basic Setting

  • The Manual Heating/Air Conditioning controller does not require a scan tool to perform the Basic Settings for the Activation of the A/C Compressor, please use the following instructions below.
    • Position the blower switch to the first or second speed
    • Position the air distribution control to 'Vent'
    • Position the interior temperature control to 'Cold', turn to the stop
    • Start the Vehicle's engine while in Park/Neutral
    • Simultaneously press/ hold the AC and Defrost buttons until the AC and recirculation buttons illuminate
    • Cycle the ignition and check for fault codes in the 08-Auto HVAC and proper HVAC system operation.

Special Notes

  • This procedure above, must be competed when:
    • The J301-Air conditioning system control unit is replaced.
    • The fault code 00898-005 will not clear.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=VW_Jetta_(AJ/16)_Manual_Heating/Air_Conditioning&oldid=7541"