Audi CAN Gateway Battery Coding (8T/8K/8R+)

From Ross-Tech Wiki
Revision as of 12:42, 23 January 2015 by Dana (talk | contribs)


General Information: Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager. In these cases battery management is a slave (subsystem) under the 19-CAN-Gateway control module. This page covers those 8T/8K/8R and newer models using a CAN Protocol 19-CAN-Gateway control module.

If the vehicle in question uses a diagnostic capable 61-Battery Regulation controller this page should apply instead:


Long Adaptation

Installation of a new battery requires the use of the Long Adaptation function under 19-CAN-Gateway control module. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.


Special Notes

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Audi_CAN_Gateway_Battery_Coding_(8T/8K/8R%2B)&oldid=7558"