01176

From Ross-Tech Wiki
Revision as of 12:18, 1 August 2006 by Gerrit Speek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

01176 - Key Faulty: Signal too Low

Possible Causes

  • Low voltage in key-battery
  • Bad connections between immo reader coil and immo control module

Possible Solutions

  • Replace key-battery
  • If more than one key acts like this, check / clean the connector between immo reader coil and immo control module, the contacts tend to oxidize
  • There is also another known issue with the wiring between reader coil and immo module, they are known to be too short so there is a 'longer' wiring (8D0-972-275) available
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=01176&oldid=2702"