VW Passat (3C) Tire Pressure Monitoring
From Ross-Tech Wiki
Revision as of 15:30, 29 January 2008 by RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == Coding == * '''Rest of World (RoW)''': ** 0161211 = Factory ** 0161210 = Service (for manual input of specified pressure) * '''North America (NAR)''': ** 0100101 = Factor...)
Coding
- Rest of World (RoW):
- 0161211 = Factory
- 0161210 = Service (for manual input of specified pressure)
- North America (NAR):
- 0100101 = Factory
- 0100100 = Service (for manual input of specified pressure)
Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterwards to their specified Values.
Security Access
- 01503 - General Adaptation "Enabling"
Adaptation
Channel 005: Specified Tire Pressure at Full Load (Front Axle)
The specified tire pressure is beeing entered without a comma. So 2.4 bar is entered as 24.
Channel 006: Specified Tire Pressure at Partial Load (Front Axle)
The specified tire pressure is beeing entered without a comma. So 2.4 bar is entered as 24.
Channel 007: Specified Tire Pressure at Full Load (Rear Axle)
The specified tire pressure is beeing entered without a comma. So 2.4 bar is entered as 24.
Channel 008: Specified Tire Pressure at Partial Load (Rear Axle)
The specified tire pressure is beeing entered without a comma. So 2.4 bar is entered as 24.