00778

From Ross-Tech Wiki

00778 - Steering Angle Sensor (G85)

00778 - Steering Angle Sensor (G85)

Possible Causes

  • Steering Angle Sensor (G85) Basic Setting lost

Possible Solutions

Special Notes

  • This Fault Code may also be stored even though the Steering Angle Sensor (G85) is properly calibrated (Basic Setting), though it may not be finally initialized yet. Check the Measuring Value Blocks (MVB) in the Steering Aid Control Module (J500 / #44) for details. The Initialization will usually take place during a test drive.


00778 - Steering Angle Sensor (G85): Faulty

00778 - Steering Angle Sensor (G85): Defective

Possible Causes

  • Steering Angle Sensor (G85) faulty

Possible Solutions

  • Check Steering Angle Sensor (G85)

Special Notes

  • With steering wheel level, wheels pointing straight ahead, make sure G85 is reporting 0 degrees +/- 5 degrees. If a reading of +360 or - 360 degrees is found. Remove steering wheel and turn clock spring 1 turn in direction needed to fix. See repair manual.

00778 - Steering Angle Sensor (G85): Implausible Signal

Possible Causes

  • Steering Angle Sensor (G85) Basic Setting lost
  • Steering Angle Sensor (G85) Installation Position incorrect
  • No Communication between Steering Angle Sensor (G85) and Brake Electronics (J104)

Possible Solutions

  • Perform Steering Angle Sensor (G85) Basic Setting
  • Check Steering Angle Sensor (G85) Installation Position
  • Check communication between Steering Angle Sensor (G85) and Brake Electronics (J104)


00778 - Steering Angle Sensor (G85): No or Incorrect Basic Setting / Adaptation

00778 - Steering Angle Sensor (G85): Not Matched

Possible Causes

  • Steering Angle Sensor (G85) Basic Setting lost

Possible Solutions

Special Notes


00778 - Steering Angle Sensor (G85): Mechanical Failure

Possible Causes

  • Steering Angle Sensor (G85) Basic Setting lost
  • Steering Angle Sensor (G85) Installation Position incorrect
  • Suspension Geometry incorrect

Possible Solutions

  • Perform Steering Angle Sensor (G85) Basic Setting
  • Check Steering Angle Sensor (G85) Installation Position
  • Check Suspension Geometry