17931/P1523/005411

From Ross-Tech Wiki
Revision as of 10:27, 13 February 2018 by Dana (talk | contribs)

17931/P1523/005411 - Crash Signal from Airbag Controller: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Wiring and/or Connector(s) from/to Airbag Control Module (J234) faulty

Possible Solutions

  • Check Wiring and/or Connector(s) from/to Airbag Control Module (J234)

Special Notes

  • When found in early Audi models that use a primitive "crash signal" wire that's spliced to the 01-Engine, 15-Airbags, 35-Cent Locking/46-Cent. Comfort module search the wiring diagrams to see if the dash mounted E3 (4-way hazard/emergency flasher switch) is on that same splice. A faulty E3 (hazard) switch on a "crash signal" circuit can cause this fault code in vehicles such as the (8N) TT and similar.