Trailer Hitch Retrofitting (7L)

From Ross-Tech Wiki
Revision as of 12:32, 29 June 2007 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

CAN-Gateway

[Select]
[19 - CAN-Gateway]
If the control module does NOT support long coding, proceed to the Trailer Control Module Coding (Gateway doesn't need to be recoded).
[Coding - 07]
[Long Coding Helper]
Set Byte 03 Bit 1 = [69] Trailer active.
[Do It!]
[Close Controller, Go Back - 06]


Trailer Control Module

NOTE: This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not.

Variant #1: Trailer Control Module (#69) NOT diagnostic capable

Nothing to do here, so leave it alone.

Variant #2: Trailer Control Module (#69) diagnostic capable

This control module requires a coding, see VAG-COM coding help or vehicle specific coding table for details.


Others

If installed the following modules may need to be recoded/adapted.

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Trailer_Hitch_Retrofitting_(7L)&oldid=3772"