02511
From Ross-Tech Wiki
Revision as of 12:53, 12 March 2008 by RtWiKiSyS0p (talk | contribs)
02511 - Control Module for Seat Occupied Recognition (J706)
02511 - Control Module for Seat Occupied Recognition (J706): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Function Limitation
- Airbag Warning Light active
Possible Causes
- Basic Setting Not Performed
Possible Solutions
- Perform Basic Setting
Special Notes
- When found in Audi A3 (8P): Airbag 9.41, perform Basic Setting.
- When found in Audi A4 (8E): Airbag 9.41, perform Basic Setting.
- When found in Audi A6 (4F): Airbag, perform Basic Setting.
- When found in Audi A8 (4E): Airbag, perform Basic Setting.
- When found in Audi Q7 (4L): Airbag, perform Basic Setting.
- When found in VW Golf/Jetta/Bora V (1K/5M): Airbag, perform Basic Setting.
- When found in VW New Beetle/Cabriolet (1C/1Y/9C): Airbag, perform Basic Setting.
- When found in VW Passat (3C): Airbag, perform Basic Setting.
- When found in VW Phaeton (3D): Airbag, perform Basic Setting.
- When found in VW Touareg (7L): Airbag, perform Basic Setting.
02511 - Control Module for Seat Occupied Recognition (J706): Implausible Signal
Possible Symptoms
- Function Limitation
- Airbag Warning Light active
Possible Causes
- Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706) faulty
- Control Module for Seat Occupied Recognition (J706) faulty
Possible Solutions
- Check Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706)
- Check Measuring Value Blocks (MVB) for Seat Occupation Pressure Sensor (G452)
- Check/Replace Control Module for Seat Occupied Recognition (J706)