VW Golf (1J) Central Locking (Generation 3)

Coding

• Central Locking (2 Doors):
  • 00016 = Selective Locking
  • 00017 = Unlocking of all Doors
• Central Locking (4 Doors):
  • 00018 = Selective Locking
  • 00019 = Unlocking of all Doors

Adaptation

Channel 00: Remote Control Clearing

This channel clears all previously adapted remotes. It is advised to clear old remotes if the Remote Control Adaptation is not successful.

[Select]
[35 - Cent. Locking]
[Adaptation - 10]
Channel 00
Read]
The New value will be 0 by default.
[Save]
When the prompt asks if you are sure you want to save a value of 0 to Channel 00, click [Yes]

Channel 01: Remote Control Adaptation

[Select]
[35 - Cent. Locking]
[Adaptation - 10]
Channel 01
Read]

• This will display the number of currently stored remotes in "Stored Value".
• Enter your total number of keys up to a maximum of 4 (including any existing keys) in "New Value"

[Test]
Verify that the number in "Test Value" is correct.
[Save]
When the prompt asks if you are sure you want to save a value of x to Channel 00, click [Yes]

• Press and hold (for at least one second) the UNLOCK button on the fob, at which time it will be learned.
  • If you're programming more than one fob press and hold the UNLOCK button on the second fob for one second, press and hold the UNLOCK button on the third fob for one second, etc.
• You have a total of 15 seconds to do them all.
  

The car may give you some sort of acknowledgment as each key is learned (lights flash, horn beep, etc.)