Cruise Control Retrofitting (9N)

Requirements

Central Electronics Control Module

There are 3 Types of Central Electronic Control Modules (J519 / #09), only 2 of them support Cruise Control. The installed Type can easily be determined by the Control Module Part Number. Higher equipped Types always include the Options from the lower equipped ones.

• Basis
  • Part Numbers: 6Q2-937-049-***
• Medium
  • Part Numbers: 6Q1-937-049-***
  • Supported Features: Cruise Control System (CCS), Heated Front Window
• High
  • Part Numbers: 6Q0-937-049-***
  • Supported Features: Automatic Transmission (Shift Lock),

Engine Control Module

Some Engines were never available with Cruise Control from Factory but may still support the Configuration/Activation. The following List contains some of those Exceptions and if they support Cruise Control or not. Engines not listed here are assumed to support Cruise Control, exceptions may exist. ;-)

• 1.2l MPI AWY (47 kW / Simos 3PD)
  • Cruise Control NOT supported, will accept Activation though
• 1.2l MPI BBM (44 kW / Simos 9.1)
  • Cruise Control supported

Installation & Wiring

Please refer to Repair Manuals, Wiring Diagram, Parts Catalog and/or the Instructions included in the Retrofitting Kit for Details.

Configuration

The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.

• Update the Engine Control Module (J623 / #01) Coding
  • Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.

If you are having trouble finding/calculating the proper Coding using the Long Coding Assist please Contact us directly. Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.