D A N A

This is my test page please leave it alone ;-)

Red

A0A0A0

1. C0C0C0

D0D0D0 FFFFFF

---

This chart shows what information is needed to perform each procedure. The requirements and steps differ depending on whether the component you are installing is brand new, or if it has been previously matched to a vehicle. Used keys are ones that have previously been matched to a different vehicle.

---

space	Immo 1 & 2	Immo 3	Immo 4A	Immo 4C
Key Matching (New)	Vehicle SKC Needed	Vehicle SKC Needed	Vehicle SKC Needed
Key Matching (Used)	Vehicle SKC Needed	Not Possible	Not Possible	Not Possible
ECU Swapping (New)	No SKC needed see note	Vehicle SKC Needed	Vehicle SKC Needed	-
ECU Swapping (Used)	No SKC needed see note	-	-	-
Cluster Swapping (New)	-	-	-	-
Cluster Swapping (Used)	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-
	-	-	-	-

This	is
a	table

An example table

First header	Second header
upper left		right side
lower left	lower middle
A table in a table [[1]] File:Wiki.png Two Wikimedia logos

http://meta.wikimedia.org/wiki/Help:Table

0xxxxxxx	0	1	0	1	0	1	0	1
x0xxxxxx	0	1	0	1	0	1	0	1
xx0xxxxx	0	1	0	1	0	1	0	1
xxx0xxxx	0	1	0	1	0	1	0	1
xxxx0xxx	0	1	0	1	0	1	0	1
xxxxx0xx	0	1	0	1	0	1	0	1
xxxxxx0x	0	1	0	1	0	1	0	1
xxxxxxx0	0	1	0	1	0	1	0	1

---

Measuring Block Group 066 Field 2 Data
0xxxxxxx	0	1	0	1	0	1	0	1	0 =	1 =
x0xxxxxx							-		0 =	1 =
xx0xxxxx									0 =	1 =
xxx0xxxx									0 =	1 =
xxxx0xxx									0 =	1 =
xxxxx0xx									0 =	1 =
xxxxxx0x									0 =	1 =
xxxxxxx0									0 = Normal CCS	1 = Accel. pedal overide

Measuring Block Group 066 Field 4 Data
0xxxxxxx	0	1	0	1	0	1	0	1
x0xxxxxx
xx0xxxxx
xxx0xxxx
xxxx0xxx
xxxxx0xx									0 =	1 =
xxxxxx0x									0 =	1 =
xxxxxxx0									0 = Normal CCS	1 = Accel. pedal overide

0	1	0	1	1	1	0	1	0 = Brake Not Depressed	1 = Brake depressed (brake light switch)
								0 = Brake Not Depressed	1 = Brake depressed (brake pedal switch)
								0 = Clutch Not Depressed	1 = Clutch Depressed (always 1 in Auto. Trans.)
								0 = CCS Not active in ECM	1 = CCS active in ECM
								N/A	N/A
								N/A	N/A
								0 = Accel. pedal overide	1 = CCS Operating
								0 = Normal CCS	1 = Accel. pedal overide