Audi A6 (4B) Central Locking

Coding

VCDS will display a coding chart a pop-up balloon while connected to the vehicle.
Add the sum of the options to configure the correct coding.

Adaptation

Channel 021: Remote Control Matching

[Select]
[35 - Centr Locks]
[Adaptation - 10]
Channel 021.
[Read]

• Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].

[Test]

• Now press any button on the remote you want to match.
• The meas. block field above will change from Not Recogn. to Recognized.

[Save]

[Done, Go Back]
[Close Controller, Go Back - 06]

Note: You can check the current memory positions using Meas. Block 007.

Special Notes

The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.

• If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
  • Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].