Bentley Continental (3W) Brake Electronics (Bosch 5.7)

From Ross-Tech Wiki
Revision as of 14:45, 27 April 2011 by Andy (talk | contribs)

[Coding II - 11]

Note #1: After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.

  • 03121 = Bentley Continental Flying Spur (3W - BY611)
  • 02121 = Bentley Continental GT/Cabrio (3W - BY614/BY615)


[Coding - 07]

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.

  • 0006878 = Bentley Continental Flying Spur (3W - BY611)
  • 0007878 = Bentley Continental GT/Cabrio (3W - BY614/BY615)


Basic Setting

Steering Angle Sensor (G85) Calibration

Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Coding II - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Bentley_Continental_(3W)_Brake_Electronics_(Bosch_5.7)&oldid=5762"