01200

From Ross-Tech Wiki
Revision as of 12:48, 21 July 2011 by Dana (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

01200 - ABS Valves Supply Voltage

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Brake Electronics Control Module (J104) faulty
  • Brake Electronics Control Module (J104) faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Brake Electronics Control Module (J104)
  • Check/Replace Brake Electronics Control Module (J104)

Special Notes

  • This Fault Code usually effects the Hydraulic Unit (N55) and the Hydraulic Pump (V39).
  • On vehicles that use the Bosch ABS system this connection is typically a separate 2 wire connector below the module. When this fault is stored after module replacement make sure it was reconnected.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=01200&oldid=6041"