VW Phaeton (3D) Brake Electronics
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #3: Use function Coding-II instead of Login if that button is unavailable.
- 0?xxx: Chassis
- 5 = VW Phaeton (3D)
- 0x?xx: Brakes
- 1 = Brembo 18" (PR-1LC)
- 2 = HP2 16" (PR-1LX)
- 4 = 2FNR 42 AL 17" (PR-1ZL/1ZK)
- 0xx?x: Engine
- 4 = 10 Cyl. Diesel Engine (PR-T2M)
- 5 = 6 Cyl. Diesel Engine (PR-T41)
- 6 = 6 Cyl. Gasoline Engine (PR-T31) with All-Wheel-Drive (AWD)
- 7 = 8 Cyl. Gasoline Engine (PR-T81)
- 9 = 6 Cyl. Gasoline Engine (PR-T31) with Front-Wheel-Drive (FWD)
- 9 = 12 Cyl. Gasoline Engine (PR-T08/T1H)
- 0xxx?: Transmission
- 5 = Manual Transmission (01E - PR-G0K)
- 7 = Automatic Transmission (01L/01V - PR-G0F/G0Q)
- 6 = Automatic Transmission (09L - PR-G0R)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #4: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.
- 000?xxx: Chassis
- 8 = VW Phaeton (3D)
- 000x?xx: Brakes
- 3 = 2FNR 42 AL 17" (PR-1ZL/1ZK)
- 5 = HP2 16" (PR-1LX)
- 6 = Brembo 18" (PR-1LC)
- 000xx?x: Engine
- 4 = 10 Cyl. Diesel Engine (PR-T2M)
- 5 = 6 Cyl. Diesel Engine (PR-T41)
- 6 = 6 Cyl. Gasoline Engine (PR-T31) with All-Wheel-Drive (AWD)
- 7 = 8 Cyl. Gasoline Engine (PR-T81)
- 9 = 6 Cyl. Gasoline Engine (PR-T31) with Front-Wheel-Drive (FWD)
- 9 = 12 Cyl. Gasoline Engine (PR-T08/T1H)
- 000xxx?: Transmission
- 5 = Manual Transmission (01E - PR-G0K)
- 7 = Automatic Transmission (01L/01V - PR-G0F/G0Q)
- 6 = Automatic Transmission (09L - PR-G0R)
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Or [Coding - 11] if Login is not shown
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Video Link
Bosch 5.3 and 5.7 ABS with ESP, Coding
