VW Touareg (7P) Parking Brake
Coding
Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module. If this is not possible each coding inquiry has to be configured per vehicle based on the complete Auto-Scan and vehicle repair history. Registered Customers can email directly with each request.
Basic Setting
We do not have a procedure to offer after mechanical repairs to this Electro-Mechanical Parking Brake (EPB) system at this time.
Delete Vehicle Identification Number (VIN)
Replacement
After Replacing this Control Module these Steps have to be performed in the following Order:
- Code Parking Brake Electronics (J104) Control Module
- Delete Vehicle Identification Number (VIN)
- Air Gap Adjustment
- Function Test
In case you are having trouble with procedure please contact us directly and we will assist you with the Coding Process. Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.
TSD?ID=44700 -and- E?ID=139918