7-Speed S-Tronic Direct-Shift Gearbox (DSG/0B5)

General Information about this Transmission can be found in the Wikipedia entry. Additional information can be found in the Official Factory Repair Information.

Coding

• When replacing this Mechatronic unit Component Protection fault code(s) may be stored.

Basic Setting

Prerequisites:

• TCM fault free however it is strongly recommended to check/clear all Powertrain controllers faults also.
  
• Key on, Engine off
  
• Selector lever in P
  

[Select]
[02 - Auto Trans]
[Basic Settings - 04]

-- Save for another phone call--

At the present time we do not have a Basic Setting procedure on this page however the following thread in our forum can be used: http://forums.ross-tech.com/showthread.php?2293-Audi-A4-2-0-TFSI-Quattro-s-tronic-0B5-%28DL501%29-problem&p=23158&viewfull=1#post23158

---

Special Notes

• Numerous Audi TPIs/TSBs exist for 0B5 transmission problems. Although a majority are flash update related some are hardware ("printed circuits"/internal wiring harness) related instead such as TPI 2022497 when P1740 - Clutch Temperature Monitoring is stored.