VW Passat (3C) Trunk Electronics

From Ross-Tech Wiki
Revision as of 15:34, 18 May 2016 by Dana (talk | contribs) (Created page with "__FORCETOC__ This page applies to Address-6D: Trunk Elect.in the VW Passat (3C) Wagon with Component: J605 HECKDECKEL. This can be identified by evaluating the data in the Au...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page applies to Address-6D: Trunk Elect.in the VW Passat (3C) Wagon with Component: J605 HECKDECKEL. This can be identified by evaluating the data in the Auto-Scan:

Address 6D: Trunk Elect.        Labels: None
    Part No SW: 3C9 827 383 B    HW: 3C9 827 383 E
    Component: J605  HECKDECKEL    0600
    Revision: 00H21001

    Subsystem 1 - Part No: 3C9 827 384 B
    Component: J756  HECKDECKEL    0600

    Subsystem 2 - Serial number:

Coding

  • This control module does not support Coding.

General Information

  • When replacing the master or slave control module with integrated motors it may be necessary to initialize the new parts. A scan tool is not used for this initialization. Hold the exterior hatch button in addition to the hatch closing button in the rear hatch trim for 5 seconds. The comfort system should confirm the learning completed by flashing the lights or beeping the siren.