Functions
From Ross-Tech Wiki
This chart shows the functions currently supported by each of our software products, as compared to the factory scan tools. Keep in mind that not all controllers in all cars will support all functions so please refer to the Factory Repair Manual for each vehicle to determine what should be supported. Also some functions (such as Advanced Measuring Values) may only work with supporting documentation which may not be exist for some modules at the present time. Some UDS functions require supporting documentation for VCDS-Mobile that requires a cloud connection at least once. Click on each of the links in the chart for more information including known limitations.
| VAS/ODIS | VCDS-Lite Shareware | VCDS Full Version | VCDS-Mobile |
| $?-$15k Factory scan tools Function Number / Name |
$0 - $99 Non-dongle/3rd Party Interfaces |
HEX-V2 or HEX-NET | |
| Platform | Windows PC | Windows PC | Windows PC |
| 00 AutoScan | Registered Version Only | Yes | Yes |
| 01 Control Unit Info | Yes | Yes | Yes |
| 02 Read Fault Codes | Limited unless Registered | Yes | Yes |
| 03 Output Tests | Registered Version Only | Yes | Yes via Cloud |
| Selective Output Tests | No | Yes | Yes via Cloud |
| 04 Basic Settings | Registered Version Only | Yes | Yes via Cloud |
| 05 Clear Fault Codes | Yes | Yes | Yes |
| 06 Close Controller | Yes | Yes | Yes |
| 07 Code Module | Yes | Yes | Yes via Cloud |
| Code Slave Modules | No | Yes | Yes via Cloud |
| 08 Measuring Blocks | Limited unless Registered | Yes | Yes, via Advanced Measuring Values |
| Advanced Measuring Values | No | Yes | Yes |
| 09 Single Reading | Yes | Yes | TBD |
| 10 Adaptation | Limited unless registered | Yes | Yes via Cloud |
| 11 Login / Coding II | Yes | Yes | Yes via Cloud |
| 15 View Readiness | Yes | Yes | TBD |
| Guided Readiness Scripts | No | Yes | Planned |
| 16 Security Access | Registered Version Only | Yes | Yes via Cloud |
| 18 Supported Codes | No | Yes | TBD |
| 33 Generic OBD-II | No | Yes | TBD |
| 18 Freeze-Frame Data | Registered Version Only | Yes | Yes |
| Dual K-Line Support | Yes | Yes | Yes |
| 7-Digit PINs (VAS only) | Registered Version Only | Yes | TBD |
| Code Database Up to Date | Current through ~2006 | Yes | Yes |
| Diagnostics via CAN | No | Yes (with CAN Interface) |
Yes |
| Transport Mode | No | Yes | Planned |
| Support for Dual ECUs | No | Yes | Yes |
| Data Logging | Limited unless registered | Yes | Yes |
| HighSpeed DataLogging (Factory tools cannot do this!) |
No | Yes | TBD |
| Real-Time Graphs (Factory tools cannot do this!) |
Limited unless registered | Yes | Yes |
| Real-Time Gauges (Factory tools cannot do this!) |
Limited unless registered | Yes | Yes |
| Graphic TDI Timing Checker (Factory tools cannot do this!) |
Registered Version Only Not for V6 TDI |
Yes | TBD |
| Control Module Finder (Factory tools cannot do this!) |
Yes | Yes | TBD |
| Automated Service Reset (SRI) | No | Yes | Planned |
| ECU Mileage Checker (Many EDC-15/16 ECUs) |
No | Yes | Planned |
| Controller Channel Maps | No | Yes | TBD |
| Wireless Connection via WiFi | No | Yes with HEX-NET |
Yes |
| Installation List | No | Yes | Planned |
| LT3/Crafter Support | No | Yes |
Planned |
| Optical Bus Diagnostics | No | Yes HEX-NET or HEX-V2 required for UDS protocol |
TBD |
"Planned" = We plan to add this function but it is not currently available.
"TBD" = To Be Determined, since we are still evaluating the incorporation of this function.