MLB based Trunk Electronics (J605)

From Ross-Tech Wiki
Revision as of 10:47, 1 September 2020 by Dana (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page applies to MLB based Address 6D-Trunk Elect. (J605) installed in MLB based models such as the Audi A4 (8K) Wagon/Avant and Q5 (8R). The installed Trunk Electronics module can be identified by evaluating the data in the Auto-Scan. The Component field will include J605 Master: 

Address 6D: Trunk Elect. (J605)       Labels: 8K9-827-851.clb
   Part No SW: 8R0 827 851 B    HW: 8R0 827 851 B
   Component: J605  Master  H27 0300

   Subsystem 1 - Part No SW: 8R0 827 852 B    HW: 8R0 827 852 B
   Component: J756  Slave  H27 0300

Address 6D: Trunk Elect. (J605)       Labels: 8K9-827-851.clb
   Part No SW: 8K9 827 851     HW: 8K9 827 851
   Component: J605  Master  H27 0240

   Subsystem 1 - Part No SW: 8K9 827 852     HW: 8K9 827 852
   Component: J756  Slave  H27 0240

Beneath the master module details slave information Component: J756 Slave will be shown as well when everything is communicating properly.


Coding

  • This module does not support Coding.


Adaptation

  • The Adjustable opening stop can be set using Adaptation. Information will be shown when using the Adaptation function while connected to the vehicle with VCDS.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=MLB_based_Trunk_Electronics_(J605)&oldid=8916"