Difference between revisions of "00775"
From Ross-Tech Wiki
Gerrit Speek (talk | contribs) (New page: __FORCETOC__ == 00775 - Level Control System Sensor; Rear Right (G77) == === 00775 - Level Control System Sensor; Rear Right (G77): Implausible Signal === ==== Possible Symptoms ==== * ...) |
|||
| Line 10: | Line 10: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| + | * G77 sensor or wiring connections faulty | ||
* Communication Problem between Level Control Module (J197) and Headlight Aim Control Module | * Communication Problem between Level Control Module (J197) and Headlight Aim Control Module | ||
* Wiring/Connectors from/to Level Control Module (J197) faulty | * Wiring/Connectors from/to Level Control Module (J197) faulty | ||
| Line 15: | Line 16: | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| + | * Check G77 sensor and related wiring connections | ||
* Check Communication Problem between Level Control Module (J197) and Headlight Aim Control Module | * Check Communication Problem between Level Control Module (J197) and Headlight Aim Control Module | ||
* Check Wiring/Connectors from/to Level Control Module (J197) | * Check Wiring/Connectors from/to Level Control Module (J197) | ||
Latest revision as of 13:12, 2 February 2016
00775 - Level Control System Sensor; Rear Right (G77)
00775 - Level Control System Sensor; Rear Right (G77): Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- G77 sensor or wiring connections faulty
- Communication Problem between Level Control Module (J197) and Headlight Aim Control Module
- Wiring/Connectors from/to Level Control Module (J197) faulty
Possible Solutions
- Check G77 sensor and related wiring connections
- Check Communication Problem between Level Control Module (J197) and Headlight Aim Control Module
- Check Wiring/Connectors from/to Level Control Module (J197)
Special Notes
- If the Vehicle had been lifted and one or both axles rebounded while Ignition ON or the Sensor disconnected while Ignition ON
- Ignore/Clear Fault Code