Difference between revisions of "01200"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (Created page with '== 01200 - ABS Valves Supply Voltage == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON ==== Possible Causes ==== * Fuse(s) faulty * Wiring and/or Connecto…') |
|||
| Line 20: | Line 20: | ||
* This Fault Code usually effects the Hydraulic Unit (N55) and the Hydraulic Pump (V39). | * This Fault Code usually effects the Hydraulic Unit (N55) and the Hydraulic Pump (V39). | ||
| + | * On vehicles that use the Bosch ABS system this connection is typically a separate 2 wire connector below the module. When this fault is stored after module replacement make sure it was reconnected. | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 13:48, 21 July 2011
01200 - ABS Valves Supply Voltage
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Fuse(s) faulty
- Wiring and/or Connector(s) from/to Brake Electronics Control Module (J104) faulty
- Brake Electronics Control Module (J104) faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Brake Electronics Control Module (J104)
- Check/Replace Brake Electronics Control Module (J104)
Special Notes
- This Fault Code usually effects the Hydraulic Unit (N55) and the Hydraulic Pump (V39).
- On vehicles that use the Bosch ABS system this connection is typically a separate 2 wire connector below the module. When this fault is stored after module replacement make sure it was reconnected.