Difference between revisions of "02214"

From Ross-Tech Wiki
m
m
Line 16: Line 16:
 
* When found in [[Seat Exeo (3R)]]: Tire Pressure Monitoring II, perform System Reset.
 
* When found in [[Seat Exeo (3R)]]: Tire Pressure Monitoring II, perform System Reset.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
** Once the Calibration has been performed clear/check Fault Codes and check the Tire Pressure.
+
** Switch the Ignition OFF.
 +
** Clear/check Fault Codes and check/correct the Tire Pressure.
 +
** Switch the Ignition ON.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
 
* When found in [[VW Golf/Jetta/Bora (1K/5M)|VW Golf (1K)]] or similar: [[VW Golf (1K) Brake Electronics (MK60)|Brake Electronics (MK60)]], perform [[VW Golf (1K) Brake Electronics (MK60)#Tire Pressure Monitoring System Reset|System Reset]]
 
* When found in [[VW Golf/Jetta/Bora (1K/5M)|VW Golf (1K)]] or similar: [[VW Golf (1K) Brake Electronics (MK60)|Brake Electronics (MK60)]], perform [[VW Golf (1K) Brake Electronics (MK60)#Tire Pressure Monitoring System Reset|System Reset]]

Revision as of 08:48, 18 March 2013

02214 - Tire Pressure Warning

02214 - Tire Pressure Warning: Defective

Possible Symptoms

  • Tire Pressure Monitoring not working

Possible Solutions

  • Reset Tire Pressure Monitoring

Special Notes