02214

From Ross-Tech Wiki
Revision as of 09:59, 30 April 2021 by Jef (talk | contribs) (→‎Special Notes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

02214 - Tire Pressure Warning

02214 - Tire Pressure Warning: Defective

Possible Symptoms

  • Tire Pressure Monitoring not working

Possible Solutions

  • Reset Tire Pressure Monitoring

Special Notes

  • When found in Seat Exeo (3R): Tire Pressure Monitoring II, perform System Reset.
    • Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
    • Clear/check Fault Codes.
    • Switch the Ignition OFF.
    • Check/correct the Tire Pressure.
    • Switch the Ignition ON.
    • Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
  • When found in VW Golf (1K) or similar: Brake Electronics (MK60), perform System Reset
  • When found in VW Golf (1K) or similar: Brake Electronics (MK70), perform System Reset
  • When found in VW Passat (3C): Brake Electronics, perform System Reset
  • When found in 2014-2015 Golf Mk6 based vehicles with MK60EC1 ABS check applicable TSBs and recalls. The following part numbers are noted for setting this DTC prior to the dealer level software updates:
    • 1K0 907 379 BM with problematic software level 0163 and 0164
    • 1K0 907 379 BS with problematic software level 0165
      • NAR (North American Region) Market Jetta, Beetle and Beetle Convertible see the 45D7 recall
      • RoW (Rest of World) market Jetta and Beetle see TPI: 2037662 (or 2038535)
        • Regardless of market the module will show 1K0 907 379 BS with software level 0166 (or higher) after the update was performed.