Difference between revisions of "16706/P0322/000802"

From Ross-Tech Wiki
m
 
(One intermediate revision by one other user not shown)
Line 6: Line 6:
 
* Engine shuts off
 
* Engine shuts off
 
* Engine doesn't start
 
* Engine doesn't start
* Speedometer inoperative
+
* Tachometer / Rev Counter inoperative
 
* Glow Plug Indicator Lamp (K29) flashes
 
* Glow Plug Indicator Lamp (K29) flashes
  
Line 21: Line 21:
  
 
* The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.
 
* The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.
 +
* Check the wiring to/from the sensor and engine control module to rule out harness and module damage due to engine oil or coolant from a failed sensor or tensioner. This is an example from a [http://wiki.ross-tech.com/wiki/images/0/02/2012_Tiguan_with_Coolant_in_ECM.JPG 2012 Tiguan with Coolant in the ECM] which resulted in G28 DTCs in addition to intermittent stalling.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 11:26, 26 January 2017

16706/P0322/000802 - Engine Speed Sensor (G28): No Signal

Possible Symptoms

  • Engine shuts off
  • Engine doesn't start
  • Tachometer / Rev Counter inoperative
  • Glow Plug Indicator Lamp (K29) flashes

Possible Causes

  • Engine Speed Sensor (G28) loose
  • Engine Speed Sensor (G28) faulty

Possible Solutions

  • Check Engine Speed Sensor (G28)

Special Notes

  • The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.
  • Check the wiring to/from the sensor and engine control module to rule out harness and module damage due to engine oil or coolant from a failed sensor or tensioner. This is an example from a 2012 Tiguan with Coolant in the ECM which resulted in G28 DTCs in addition to intermittent stalling.