Difference between revisions of "Audi Radio/Navigation System (RNS-E)"

From Ross-Tech Wiki
m
 
(10 intermediate revisions by 3 users not shown)
Line 3: Line 3:
  
 
*'''0?xxxxx''': ''Model''
 
*'''0?xxxxx''': ''Model''
−
**1 - Lamborghini
+
**1 = Lamborghini
−
**2 - Audi A3 (8P)
+
**2 = Audi A3 (8P)
−
**3 - Audi A4 (8E)
+
**3 = Audi A4 (8E)
−
**4 - Audi A4 Cabriolet (8H)
+
**4 = Audi A4 Cabriolet (8H)
−
**5 - Audi A6 (4B)
+
**5 = Audi A6 (4B)
−
**6 - Audi TT (8J)
+
**6 = Audi TT (8J)
−
**7 - Audi R8 (??)
+
**7 = Audi R8 (42)
−
*'''0x?xxxx''': ''Malfunction Diagnosis''
+
*'''0x?xxxx''': ''Treble Speaker Diagnosis / Optical Parking Aid''
−
**0 - Malfunction diagnosis for front loudspeakers active
+
**+1 = Front Treble Speaker Diagnosis inactive
−
**1 - Malfunction diagnosis for front loudspeakers inactive
+
**+2 = Optical Parking Aid installed/active
 
*'''0xx?xxx''': ''Sound Characteristic''
 
*'''0xx?xxx''': ''Sound Characteristic''
−
**0 - linear Sound Characteristic
+
**0 = Sound Characteristic linear
−
**1 - Audi A4 (8E)
+
**1 = Audi A4 (8E)
−
**2 - Audi A6 (4B)
+
**2 = Audi A6 (4B)
−
**3 - Audi A4 Cabriolet (8H)
+
**3 = Audi A4 Cabriolet (8H)
−
**4 - Audi TT (8J)
+
**4 = Audi TT (8J)
−
**5 - Audi A3 (8P)
+
**5 = Audi A3 (8P)
−
**9 - Sound System
+
**9 = Sound System
−
*'''0xxx?xx''': ''Telephone/Telematic''
+
*'''0xxx?xx''': ''Telephone Preparation''
−
**1 - no Telephone (Remote Feed Voltage for Microphone active)
+
**1 = Telephone Preparation NOT installed
−
**2 - Base plate (Temic - Remote Feed Voltage for Microphone inactive)
+
**2 = Telephone Preparation without Comfort Functionality
−
**3 - Base plate (Cullmann - Remote Feed Voltage for Microphone inactive)
+
**3 = Telephone Preparation (Aftermarket Retrofit)
−
**4 - Base plate (Nokia - Remote Feed Voltage for Microphone inactive)
+
**''4 = Base Plate (Nokia - Remote Feed Voltage for Microphone inactive)''
−
**5 - Telematic Europa (Remote Feed Voltage for Microphone inactive)
+
**''5 = Telematic Europa (Remote Feed Voltage for Microphone inactive)''
−
**6 - Telematic US (Remote Feed Voltage for Microphone inactive)
+
**6 = Telephone Preparation for North American Region (NAR)
−
**7 - Base plate diagnostic capable with comfort control
+
**7 = Telephone Preparation with Comfort Functionality
 
*'''0xxxx?x''': ''Equipment I''
 
*'''0xxxx?x''': ''Equipment I''
−
**1 - no additional Tuner
+
**+1 = Standard/Basic Value - Add to the Sum of Options below
−
**2 - Digital-Radio
+
**+1 = Audi Music Interface (AMI/PR-UF7) installed
−
**3 - Satellite-Radio
+
**+2 = Satellite Radio (SIRIUS/XM) installed
−
**4 - Satellite and Digital-Radio installed
+
**+4 = Analog Input (AUX/PR-UF0/UF1/UF2) installed
 
*'''0xxxxx?''': ''Equipment II''
 
*'''0xxxxx?''': ''Equipment II''
−
**1 - no TV-Tuner or CD-Changer or Multi-Function Steering Wheel
+
**+1 = Standard/Basic Value - Add to the Sum of Options below
−
**2 - TV-Tuner installed
+
**+1 = TV-Tuner (PR-QV1/QV9) installed
−
**3 - CD-Changer installed
+
**+2 = CD-Changer or iPod/USB-Interface (PR-7A2/7A5/UF1/UF2) installed
−
**4 - TV-Tuner and CD-Changer installed
+
**+4 = Multi-Function-Steering Wheel (MFSW) installed<br><br>
−
**5 - Multi-Function Steering Wheel installed
 
−
**6 - TV-Tuner and Multi-Function Steering Wheel installed
 
−
**7 - CD-Changer and Multi-Function Steering Wheel installed
 
−
**8 - TV-Tuner and CD-Changer and Multi-Function Steering Wheel installed<br><br>
 
−
 
 
  
 
== Adaptation ==
 
== Adaptation ==
 
=== Channel 001: Tire Circumference ===
 
=== Channel 001: Tire Circumference ===
−
The tire circumference is beeing adapted in "mm".
+
The tire circumference is being adapted in "mm".
−
 
 
  
 
=== Channel 002: Wheel Pulse ===
 
=== Channel 002: Wheel Pulse ===
Line 69: Line 63:
  
  
−
=== Channel 003: Speed Threshold (Video Input) ===
+
=== Channel 004: Back-Up Camera ===
 +
 
 +
* 0 = Back-Up Camera not installed
 +
* 2 = Back-Up Camera installed
 +
 
 +
 
 +
=== Channel 005: Speed Threshold (Video Input) ===
  
 
* 0 = max. 0 kph or 0 mph
 
* 0 = max. 0 kph or 0 mph
 
* 1 = max 5 kph (Standard for Europe)
 
* 1 = max 5 kph (Standard for Europe)
 +
 +
 +
=== Channel 007: Options ===
 +
=== Channel 008: Volume Characteristic ===
 +
 +
 +
=== Channel 010: Region ===
 +
 +
* 0 = Europe/North America
 +
* 1 = Australia/South America
 +
* 2 = South Africa
  
  
Line 85: Line 96:
  
 
=== Channel 018: Start Screen ===
 
=== Channel 018: Start Screen ===
 +
''The start screen setting has to correspond with the control module coding, e.g. a S3 start screen doesn't work with an A4 coding.''<br>
 
* 0 = Standard Start Screen
 
* 0 = Standard Start Screen
 
* 1 = Audi S3 Start Screen
 
* 1 = Audi S3 Start Screen
Line 91: Line 103:
 
* 4 = Audi TT Start Screen
 
* 4 = Audi TT Start Screen
 
* 5 = Audi R8 Start Screen
 
* 5 = Audi R8 Start Screen
 +
 +
 +
=== Channel 065: Read Test ===
 +
=== Channel 066: Self Test ===
 +
=== Channel 067: CD/DVD Drive ===
 +
 +
* 000 - Normal/Eject-Button enabled
 +
* 001 = Eject CD/DVD (will not be saved)
 +
* 255 = Eject-Button disabled/locked (Anti-Theft-Protection)
 +
 +
 +
=== Channel 068: Screen Test ===
 +
''Values will not be saved, they only act as initiation for each Test Picture.''<br>
 +
 +
* 0 = No Test Picture
 +
* 1 = Test Picture: Red
 +
* 2 = Test Picture: Green
 +
* 3 = Test Picture: Blue
 +
* 4 = Test Picture: White
 +
* 5 = Test Picture: Black
 +
* 6 = Test Picture: Checkerboard
 +
* 7 = Test Picture: Checkerboard (inverted)
 +
* 8 = Test Picture: 64 Gray Scales (vertical Bars)
 +
* 9 = Test Picture: Special
 +
 +
 +
=== Channel 069: Display Mechanism ===
 +
 +
* 000 = Display closed
 +
* 001 = Display open
 +
* 200 = Display half open (Obstacle)
 +
* 255 = Position undefined
 +
 +
 +
=== Channel 070: Display Brightness ===
 +
 +
* 0 = 0% Brightness (Display OFF)
 +
* 1 = 20% Brightness
 +
* 2 = 40% Brightness
 +
* 3 = 60% Brightness
 +
* 4 = 80% Brightness
 +
* 5 = 100% Brightness
 +
 +
 +
=== Channel 099: Transport Mode ===
 +
''Only applies to models without Gateway/Diagnostic Interface for Databus.''<br>
 +
 +
* 0 = Transport Mode inactive
 +
* 1 = Transport Mode active
 +
 +
 +
=== Channel 111: Reset ===
 +
 +
* To perform a system reset/restart save 1 as new value.
 +
 +
 +
=== Channel 114: FM Frequency ===
 +
 +
* Range: 875...1080
 +
 +
 +
=== Channel 117: Signal Test (Output) ===
 +
 +
* 0 = Fader Center & Balance Center
 +
* 1 = Fader Front & Balance Left
 +
* 2 = Fader Front & Balance Right
 +
* 3 = Fader Rear & Balance Left
 +
* 4 = Fader Rear & Balance Right
 +
 +
 +
=== Channel 136: Driver Position ===
 +
 +
* RNS-E Basic
 +
** 03226 = Left-Hand-Drive (LHD)
 +
** 02632 = Right-Hand-Drive (RHD)
 +
* RNS-E High/US
 +
** 00005 = Left-Hand-Drive (LHD)
 +
** 00013 = Right-Hand-Drive (RHD)

Latest revision as of 12:28, 30 April 2014

Coding

  • 0?xxxxx: Model
    • 1 = Lamborghini
    • 2 = Audi A3 (8P)
    • 3 = Audi A4 (8E)
    • 4 = Audi A4 Cabriolet (8H)
    • 5 = Audi A6 (4B)
    • 6 = Audi TT (8J)
    • 7 = Audi R8 (42)
  • 0x?xxxx: Treble Speaker Diagnosis / Optical Parking Aid
    • +1 = Front Treble Speaker Diagnosis inactive
    • +2 = Optical Parking Aid installed/active
  • 0xx?xxx: Sound Characteristic
    • 0 = Sound Characteristic linear
    • 1 = Audi A4 (8E)
    • 2 = Audi A6 (4B)
    • 3 = Audi A4 Cabriolet (8H)
    • 4 = Audi TT (8J)
    • 5 = Audi A3 (8P)
    • 9 = Sound System
  • 0xxx?xx: Telephone Preparation
    • 1 = Telephone Preparation NOT installed
    • 2 = Telephone Preparation without Comfort Functionality
    • 3 = Telephone Preparation (Aftermarket Retrofit)
    • 4 = Base Plate (Nokia - Remote Feed Voltage for Microphone inactive)
    • 5 = Telematic Europa (Remote Feed Voltage for Microphone inactive)
    • 6 = Telephone Preparation for North American Region (NAR)
    • 7 = Telephone Preparation with Comfort Functionality
  • 0xxxx?x: Equipment I
    • +1 = Standard/Basic Value - Add to the Sum of Options below
    • +1 = Audi Music Interface (AMI/PR-UF7) installed
    • +2 = Satellite Radio (SIRIUS/XM) installed
    • +4 = Analog Input (AUX/PR-UF0/UF1/UF2) installed
  • 0xxxxx?: Equipment II
    • +1 = Standard/Basic Value - Add to the Sum of Options below
    • +1 = TV-Tuner (PR-QV1/QV9) installed
    • +2 = CD-Changer or iPod/USB-Interface (PR-7A2/7A5/UF1/UF2) installed
    • +4 = Multi-Function-Steering Wheel (MFSW) installed

Adaptation

Channel 001: Tire Circumference

The tire circumference is being adapted in "mm".

Channel 002: Wheel Pulse

The wheel pulse describes the amount of wheel pulses per revolution.
If value 0 is entered the system calibrates automatically itself after several kilometers and inputs a value.

  • 43 = Audi A3 (8P) / Audi TT (8J)
  • 45 = Audi A4 (8E)


Channel 003: Language (Screen)

  • 0 = German
  • 1 = English (UK)
  • 2 = French
  • 3 = Italian
  • 5 = Spanish
  • 6 = Portuguese
  • 7 = English (UK)


Channel 004: Back-Up Camera

  • 0 = Back-Up Camera not installed
  • 2 = Back-Up Camera installed


Channel 005: Speed Threshold (Video Input)

  • 0 = max. 0 kph or 0 mph
  • 1 = max 5 kph (Standard for Europe)


Channel 007: Options

Channel 008: Volume Characteristic

Channel 010: Region

  • 0 = Europe/North America
  • 1 = Australia/South America
  • 2 = South Africa


Channel 011: Language (Speech Recognition)

  • 0 = German
  • 1 = English
  • 2 = French
  • 3 = Italian
  • 5 = Spanish


Channel 018: Start Screen

The start screen setting has to correspond with the control module coding, e.g. a S3 start screen doesn't work with an A4 coding.

  • 0 = Standard Start Screen
  • 1 = Audi S3 Start Screen
  • 2 = Audi S4 Start Screen
  • 3 = Audi RS4 Start Screen
  • 4 = Audi TT Start Screen
  • 5 = Audi R8 Start Screen


Channel 065: Read Test

Channel 066: Self Test

Channel 067: CD/DVD Drive

  • 000 - Normal/Eject-Button enabled
  • 001 = Eject CD/DVD (will not be saved)
  • 255 = Eject-Button disabled/locked (Anti-Theft-Protection)


Channel 068: Screen Test

Values will not be saved, they only act as initiation for each Test Picture.

  • 0 = No Test Picture
  • 1 = Test Picture: Red
  • 2 = Test Picture: Green
  • 3 = Test Picture: Blue
  • 4 = Test Picture: White
  • 5 = Test Picture: Black
  • 6 = Test Picture: Checkerboard
  • 7 = Test Picture: Checkerboard (inverted)
  • 8 = Test Picture: 64 Gray Scales (vertical Bars)
  • 9 = Test Picture: Special


Channel 069: Display Mechanism

  • 000 = Display closed
  • 001 = Display open
  • 200 = Display half open (Obstacle)
  • 255 = Position undefined


Channel 070: Display Brightness

  • 0 = 0% Brightness (Display OFF)
  • 1 = 20% Brightness
  • 2 = 40% Brightness
  • 3 = 60% Brightness
  • 4 = 80% Brightness
  • 5 = 100% Brightness


Channel 099: Transport Mode

Only applies to models without Gateway/Diagnostic Interface for Databus.

  • 0 = Transport Mode inactive
  • 1 = Transport Mode active


Channel 111: Reset

  • To perform a system reset/restart save 1 as new value.


Channel 114: FM Frequency

  • Range: 875...1080


Channel 117: Signal Test (Output)

  • 0 = Fader Center & Balance Center
  • 1 = Fader Front & Balance Left
  • 2 = Fader Front & Balance Right
  • 3 = Fader Rear & Balance Left
  • 4 = Fader Rear & Balance Right


Channel 136: Driver Position

  • RNS-E Basic
    • 03226 = Left-Hand-Drive (LHD)
    • 02632 = Right-Hand-Drive (RHD)
  • RNS-E High/US
    • 00005 = Left-Hand-Drive (LHD)
    • 00013 = Right-Hand-Drive (RHD)
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Audi_Radio/Navigation_System_(RNS-E)&oldid=7330"