Difference between revisions of "C10E2"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting == ==== Special Notes ==== * When found in the 03-ABS Brake module...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| + | == C10E2 01 - Control Module for Electronic Parking Brake: Electrical Failure == | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Flashing LED on Parking Brake Switch | ||
| + | * Parking Brake warning message in instrument cluster | ||
| + | * Parking Brake fails to operate | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Faulty Wiring or Connections | ||
| + | * Faulty Automatic parking brake Motor | ||
| + | * Low battery voltage (may cause component damage) | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check/repair electrical wiring or connections | ||
| + | * Replace faulty Automatic parking brake Motor | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | * When found with the "Extended UDS fault details" [Steuergerät EPB - H-Brückenfehler] / [EPB Control Module - H-Bridge Error] see [https://forums.ross-tech.com/index.php?threads/30399/ post #52 in this thread] | ||
| + | [[Category:Fault Codes]] | ||
| + | |||
| + | * Once repairs are complete, Air Gap and Basic Settings will need to be checked/performed. Please see this Ross-Tech wiki page for more information [http://wiki.ross-tech.com/wiki/index.php/VW_Touareg_(7P)_Parking_Brake VW Touareg (7P) Parking Brake] | ||
| + | |||
== C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting == | == C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting == | ||
Latest revision as of 18:22, 29 July 2022
C10E2 01 - Control Module for Electronic Parking Brake: Electrical Failure
Possible Symptoms
- Flashing LED on Parking Brake Switch
- Parking Brake warning message in instrument cluster
- Parking Brake fails to operate
Possible Causes
- Faulty Wiring or Connections
- Faulty Automatic parking brake Motor
- Low battery voltage (may cause component damage)
Possible Solutions
- Check/repair electrical wiring or connections
- Replace faulty Automatic parking brake Motor
Special Notes
- When found with the "Extended UDS fault details" [Steuergerät EPB - H-Brückenfehler] / [EPB Control Module - H-Bridge Error] see post #52 in this thread
- Once repairs are complete, Air Gap and Basic Settings will need to be checked/performed. Please see this Ross-Tech wiki page for more information VW Touareg (7P) Parking Brake
C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting
Special Notes
- When found in the 03-ABS Brake module on MQB (Mk7 chassis) vehicles with an Electro-Mechanical Parking Brake (EPB) see post #8 in this thread