Difference between revisions of "P119A/004506"

From Ross-Tech Wiki
 
(7 intermediate revisions by 4 users not shown)
Line 11: Line 11:
 
* Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
 
* Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
 
* Faulty HPFP
 
* Faulty HPFP
 +
* Faulty (leaking) fuel injector
 +
* Exhaust Leak (sounds strange, but check for one!)
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
Line 17: Line 19:
 
* Check Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
 
* Check Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
 
* Replace HPFP
 
* Replace HPFP
 +
* Check fuel injectors for leak-down
 +
* Fix exhaust leak if one is found.
  
 
==== Special Notes ====
 
==== Special Notes ====
Line 23: Line 27:
 
** (N276) ''Fuel Pressure Regulating Valve'' resistance should be approximately 1 to 5 Ω
 
** (N276) ''Fuel Pressure Regulating Valve'' resistance should be approximately 1 to 5 Ω
 
** (N290) ''Fuel Metering valve'' resistance should be approximately 0.8 to 5 Ω
 
** (N290) ''Fuel Metering valve'' resistance should be approximately 0.8 to 5 Ω
 
+
* If found with a TFSI engine and [[16555/P0171/000369]] - Fuel Trim; Bank 1: System Too Lean is also flagged, this could be caused by a failed rear main seal.
 +
** [http://forums.ross-tech.com/showthread.php?2612-TFSI-Oil-leak-Not-a-VCDS-releated-question-or-is-it TFSI - Oil leak - TFSI - Oil leak - Not a VCDS related question? or is it? ]
  
 
__FORCETOC__
 
__FORCETOC__
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 16:34, 27 July 2023

P119A/004506 - Fuel Pressure Sensor (G247) : Malfunction

Possible Symptoms

  • Malfunction Indicator Light (MIL) active
  • Reduced fuel economy and engine performance

Possible Causes

  • Faulty Fuel Pressure Sensor (G247)
  • Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
  • Faulty HPFP
  • Faulty (leaking) fuel injector
  • Exhaust Leak (sounds strange, but check for one!)

Possible Solutions

  • Replace Fuel Pressure Sensor (G247)
  • Check Wiring and/or Connector(s) from/to Fuel Pressure Sensor (G247)
  • Replace HPFP
  • Check fuel injectors for leak-down
  • Fix exhaust leak if one is found.

Special Notes

  • The Fuel Pressure Regulator Valve (N276) or Fuel Metering valve (N290) on the HPFP can fail.
    • (N276) Fuel Pressure Regulating Valve resistance should be approximately 1 to 5 Ω
    • (N290) Fuel Metering valve resistance should be approximately 0.8 to 5 Ω
  • If found with a TFSI engine and 16555/P0171/000369 - Fuel Trim; Bank 1: System Too Lean is also flagged, this could be caused by a failed rear main seal.