Difference between revisions of "P246E"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == P246E Exhaust Gas Temperature Sensor 4 Bank 1: Electrical Malfunction == ==== Possible Symptoms ==== * Power Loss/Limp mode * MIL on * Glow Plug Light on * DP...") |
(No difference)
|
Revision as of 09:54, 22 September 2017
P246E Exhaust Gas Temperature Sensor 4 Bank 1: Electrical Malfunction
Possible Symptoms
- Power Loss/Limp mode
- MIL on
- Glow Plug Light on
- DPF Light on
Possible Causes
- EGT sensor faulty
- EGT wiring faulty
Possible Solutions
- Check EGT sensor and wiring.
- Note, when found in RoW B8 chassis (8K) models with Engine code CAGA which uses the UDS protocol:
- The Advanced Measuring Values for EGT sensors may not be labeled correctly. Make sure to check [*ENG106430*] Exhaust gas temperature before particulate filter
TBC.....