Difference between revisions of "VW Golf (1K) Wiper Electronics"
From Ross-Tech Wiki
(Created page with '__FORCETOC__ == Coding == Due to different Control Modules Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the [http://www.ross-te…') |
|||
| Line 2: | Line 2: | ||
== Coding == | == Coding == | ||
| − | Due to different Control Modules Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the [http://www.ross-tech.com/vcds/tour/recode_screen.html#helper Long Coding Helper] with VCDS <br> | + | Due to different Control Modules and Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the [http://www.ross-tech.com/vcds/tour/recode_screen.html#helper Long Coding Helper] with VCDS <br> |
The Subsystem Wiper module will need to be selected as shown here: [http://www.ross-tech.com/vcds/tour/recode_screen.html#slave Coding of Slave Modules] <br> | The Subsystem Wiper module will need to be selected as shown here: [http://www.ross-tech.com/vcds/tour/recode_screen.html#slave Coding of Slave Modules] <br> | ||
Latest revision as of 11:34, 4 April 2011
Coding
Due to different Control Modules and Vehicle Equipment, the actual Coding Table is not shown here but will automatically be used by the Long Coding Helper with VCDS
The Subsystem Wiper module will need to be selected as shown here: Coding of Slave Modules
Special Notes
- The Wiper Motor will Not operate if the hood is not closed.
- If replacing or diagnosing a wiper motor problem be sure to strike the Hood Latch Switch Shut or simulate a Closed condition with a hardwired connection.