VW Golf VII (5G/AU) CAN Gateway

From Ross-Tech Wiki
Revision as of 09:34, 15 February 2017 by Andy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Coding

Use the Installation List function to check or uncheck the modules installed in the vehicle.

Adaptation

Mk7 based cars like this should support the following method for turning off transport mode:

Make sure the key is ON but the engine is OFF.

  • [Select]
  • [19 - CAN Gateway]
  • [Adaptation - 10]
  • From the Channel pulldown menu, select "IDE00002 Transport mode"
  • The stored value will show "Transport mode"
  • Use the New Value pulldown menu to select "not active"
  • [Do It!]