Difference between revisions of "VW MQB Headlight Regulation"

From Ross-Tech Wiki
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
  
This page applies to VW Touareg (7P) and VW Golf (5G/AU) Chassis vehicles with Headlight Regulation MQB headlights.  This can be identified by evaluating the data in the Auto-Scan:
+
This page directly applies to VW Touareg (7P) and VW Golf (5G/AU) Chassis vehicles with Headlight Regulation MQB headlights.  This can be identified by evaluating the data in the Auto-Scan:
  
 
  Address 55: Headlight Range (J745)      Labels: 7P6-907-357.clb
 
  Address 55: Headlight Range (J745)      Labels: 7P6-907-357.clb
Line 12: Line 12:
 
   Component: AFS-ECU      H07 0090   
 
   Component: AFS-ECU      H07 0090   
 
   ASAM Dataset: '''EV_HeadlRegulVWAFSMQB''' 001120
 
   ASAM Dataset: '''EV_HeadlRegulVWAFSMQB''' 001120
 +
 +
This page can also be used as a general Basic Settings guide for Facelift MQB cars with LED headlights using address 4B instead of 55 per this scan example:
 +
 +
Address 4B: Multifunc. Module (J745)      Labels:| 3Q0-907-338-V1.clb
 +
  Part No SW: 3Q0 907 338    HW: 3Q0 907 338
 +
  Component: FCM MQB Low  002 0286
 +
  ASAM Dataset: '''EV_MultiModulContiVW48X''' 001010
  
 
== Coding ==
 
== Coding ==
Line 27: Line 34:
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
'''[55 - Xenon Range]'''<br>
+
'''[55 - Xenon Range]''' or [4B - Multifunc. Module] when applicable<br>
 
'''[Basic Settings - 04]'''<br>
 
'''[Basic Settings - 04]'''<br>
Select '''Basic headlamp setting''' from the drop-down menu.<br>
+
Select IDE03675 '''Basic headlamp setting''' from the drop-down menu.<br>
 
'''[Go!]''' to activate the Basic Setting.<br>
 
'''[Go!]''' to activate the Basic Setting.<br>
 
* The meas. block field will show Running. <br>
 
* The meas. block field will show Running. <br>
Line 35: Line 42:
 
'''[Stop]''' after any needed mechanical adjustments are completed.<br>
 
'''[Stop]''' after any needed mechanical adjustments are completed.<br>
  
Select '''Acknowledge basic setting'''<br>
+
Select IDE03676 '''Acknowledge basic setting'''<br>
 
'''[Go!]''' to activate the Basic Setting.<br>
 
'''[Go!]''' to activate the Basic Setting.<br>
 
The adjustment should now be learned.<br>
 
The adjustment should now be learned.<br>

Latest revision as of 10:58, 13 August 2021


This page directly applies to VW Touareg (7P) and VW Golf (5G/AU) Chassis vehicles with Headlight Regulation MQB headlights. This can be identified by evaluating the data in the Auto-Scan:

Address 55: Headlight Range (J745)       Labels: 7P6-907-357.clb
  Part No SW: 7P6 907 357 C    HW: 7P6 907 357 B
  Component: AFS-ECU       H01 0091  
  ASAM Dataset: EV_HeadlRegulAFSMQBMLB 001001
Address 55: Headlight Range (J745)       Labels: 7P6-907-357.clb
  Part No SW: 7P6 907 357 D    HW: 7P6 907 357 A
  Component: AFS-ECU       H07 0090  
  ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120

This page can also be used as a general Basic Settings guide for Facelift MQB cars with LED headlights using address 4B instead of 55 per this scan example:

Address 4B: Multifunc. Module (J745)       Labels:| 3Q0-907-338-V1.clb
  Part No SW: 3Q0 907 338     HW: 3Q0 907 338
  Component: FCM MQB Low   002 0286
  ASAM Dataset: EV_MultiModulContiVW48X 001010

Coding

This control module is Long Coded. It is strongly advised to run and save a complete Auto-Scan prior to replacement so the original coding can be copied and pasted directly into the new control module. Coding information is available using the Long Coding Helper in VCDS.

Adaptation

Security Access

  • Is not necessary for Coding or Basic Settings.

Basic Setting

Headlight Adjustment

Prerequisites:

  • Vehicle must be parked on level ground and settled on its suspension

[Select]
[55 - Xenon Range] or [4B - Multifunc. Module] when applicable
[Basic Settings - 04]
Select IDE03675 Basic headlamp setting from the drop-down menu.
[Go!] to activate the Basic Setting.

  • The meas. block field will show Running.
  • Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.

[Stop] after any needed mechanical adjustments are completed.

Select IDE03676 Acknowledge basic setting
[Go!] to activate the Basic Setting.
The adjustment should now be learned.
[Stop]
[Done, Go Back]
Don't forget to check/clear fault codes afterwards.
[Close Controller, Go Back - 06]