Difference between revisions of "VW Touareg (7L) Trunk Electronics"

From Ross-Tech Wiki
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul. This can be identified by evaluating the data in the Auto-Scan:  
+
This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605  HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan:  
  
  Address 6D: Trunk Elect. (----)      Labels: 7N0-959-107.clb
+
  Address 6D: Trunk Elect.       Labels: None
   Part No SW: 7P6 959 107 C   HW: 7P6 959 107  
+
   Part No SW: 7L6 959 107 B   HW: 7L6 959 107 B
   Component: '''HDSG-Modul'''
+
   Component: '''J605  HECKKLAPPE'''    1310 
   ASAM Dataset: EV_HeckkTouar 202142
 
  
 
== Security Access ==
 
== Security Access ==
Line 12: Line 11:
 
== Coding ==
 
== Coding ==
  
* Coding information is found using the  '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]''' while connected to the vehicle with VCDS.  
+
* This control module is Short coded.
 
* When replacing this module save the original coding and transfer it to the new module.<br>
 
* When replacing this module save the original coding and transfer it to the new module.<br>
  
 
== Basic Setting ==
 
== Basic Setting ==
 
=== Rear Lid relearn ===
 
=== Rear Lid relearn ===
 +
'''<u>Prerequisites:</u>'''<br>
 +
* Rear Lid closed
 +
* No rear lid obstructions or damage to the vehicle
 +
* Battery voltage at least 12.0V
 +
* Vehicle is on a flat level surface
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
''' [6D-Trunk Elect.]
+
''' [6D-Trunk Elect.]<br>
 
 
 
''' [Security Access - 16]<br>
 
''' [Security Access - 16]<br>
Enter [59107]<br>
+
Enter 59107<br>
Press [Do it!]<br>
+
'''[Do it!]'''<br>
 
 
'''[Select]'''<br>
 
 
'''[Basic Settings - 04]'''<br>
 
'''[Basic Settings - 04]'''<br>
 
Group 001<br>
 
Group 001<br>
 
'''[Go!]'''<br>
 
'''[Go!]'''<br>
 +
The rear lid Basic Settings will now begin and the rear lid will now open. If the lid does not open use the '''[On/Off/Next]''' button.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
 
The rear lid Basic Settings will now begin and the rear lid will now open.
 
 
*When the rear lid has stopped, close the rear lid.
 
*When the rear lid has stopped, close the rear lid.
 
*Check for fault codes, clear if needed.
 
*Check for fault codes, clear if needed.
Line 38: Line 38:
 
* Check for proper operation
 
* Check for proper operation
 
* Re-check for faults
 
* Re-check for faults
 +
 +
== Special Notes ==
 +
NAR and RoW market TPIs exist for rear lid concerns with 6D part number modules when the rear lid is limited to 1/3 travel (31°):
 +
* 7L6 959 107  (all software levels)
 +
* 7L6 959 107 A  (software level 1210)
 +
** RoW market TPI 2017458
 +
** NAR market TPI 2018695
 +
After the flash update is completed address 6D should show part number 7L6 959 107 B @ software level: 1310
 +
 +
 +
 +
 +
Internal use references: ST?ID=59047 -and- ST?ID=37245

Latest revision as of 10:42, 6 June 2017

This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605 HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan:

Address 6D: Trunk Elect.        Labels: None
  Part No SW: 7L6 959 107 B    HW: 7L6 959 107 B
  Component: J605  HECKKLAPPE    1310  

Security Access

  • Security Access codes will appear when connected to the control module with VCDS.

Coding

  • This control module is Short coded.
  • When replacing this module save the original coding and transfer it to the new module.

Basic Setting

Rear Lid relearn

Prerequisites:

  • Rear Lid closed
  • No rear lid obstructions or damage to the vehicle
  • Battery voltage at least 12.0V
  • Vehicle is on a flat level surface

[Select]
[6D-Trunk Elect.]
[Security Access - 16]
Enter 59107
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
The rear lid Basic Settings will now begin and the rear lid will now open. If the lid does not open use the [On/Off/Next] button.
[Done, Go Back]

  • When the rear lid has stopped, close the rear lid.
  • Check for fault codes, clear if needed.

[Close Controller, Go Back - 06]

  • Check for proper operation
  • Re-check for faults

Special Notes

NAR and RoW market TPIs exist for rear lid concerns with 6D part number modules when the rear lid is limited to 1/3 travel (31°):

  • 7L6 959 107 (all software levels)
  • 7L6 959 107 A (software level 1210)
    • RoW market TPI 2017458
    • NAR market TPI 2018695

After the flash update is completed address 6D should show part number 7L6 959 107 B @ software level: 1310



Internal use references: ST?ID=59047 -and- ST?ID=37245