Difference between revisions of "VW Touareg (7L) Trunk Electronics"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == Coding == == Basic Setting == === Rear Lid relearn === '''[Select]'''<br> ''' [6D-Trunk Elect.] ''' [Login-11]<br> Enter [59107]<br> Press [Do it!]<br> '''...") |
|||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| + | This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul. This can be identified by evaluating the data in the Auto-Scan: | ||
| + | |||
| + | Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb | ||
| + | Part No SW: 7P6 959 107 C HW: 7P6 959 107 | ||
| + | Component: '''HDSG-Modul''' | ||
| + | ASAM Dataset: EV_HeckkTouar 202142 | ||
| + | |||
| + | == Security Access == | ||
| + | * Security Access codes will appear when connected to the control module with VCDS. | ||
| + | |||
== Coding == | == Coding == | ||
| + | |||
| + | * Coding information is found using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]''' while connected to the vehicle with VCDS. | ||
| + | * When replacing this module save the original coding and transfer it to the new module.<br> | ||
| + | |||
== Basic Setting == | == Basic Setting == | ||
| − | |||
=== Rear Lid relearn === | === Rear Lid relearn === | ||
| Line 8: | Line 21: | ||
''' [6D-Trunk Elect.] | ''' [6D-Trunk Elect.] | ||
| − | ''' [ | + | ''' [Security Access - 16]<br> |
Enter [59107]<br> | Enter [59107]<br> | ||
Press [Do it!]<br> | Press [Do it!]<br> | ||
Revision as of 18:28, 4 March 2016
This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul. This can be identified by evaluating the data in the Auto-Scan:
Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb Part No SW: 7P6 959 107 C HW: 7P6 959 107 Component: HDSG-Modul ASAM Dataset: EV_HeckkTouar 202142
Security Access
- Security Access codes will appear when connected to the control module with VCDS.
Coding
- Coding information is found using the Long Coding Helper while connected to the vehicle with VCDS.
- When replacing this module save the original coding and transfer it to the new module.
Basic Setting
Rear Lid relearn
[Select]
[6D-Trunk Elect.]
[Security Access - 16]
Enter [59107]
Press [Do it!]
[Select]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
The rear lid Basic Settings will now begin and the rear lid will now open.
- When the rear lid has stopped, close the rear lid.
- Check for fault codes, clear if needed.
[Close Controller, Go Back - 06]
- Check for proper operation
- Re-check for faults