Difference between revisions of "VW Transporter (7D) Brake Electronics (Bosch 5.3 ESP)"

From Ross-Tech Wiki
 
(6 intermediate revisions by 3 users not shown)
Line 3: Line 3:
  
 
'''''Note #1''': ''After Login has been carried out you need to recode the control module.''<br>
 
'''''Note #1''': ''After Login has been carried out you need to recode the control module.''<br>
'''''Note #2''': ''The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well. Click this link to see an example of a sticker'' http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png<br>
+
'''''Note #2''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. <br>Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br>
  
07669
+
'''07669''' is the Login code needed for US Market with (PR-1P4/1LB)
US Market = (PR-1P4/1LB)
 
  
 
If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.
 
If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.
Line 14: Line 13:
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
'''''Note #3''': ''The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well. Click this link to see an example of a sticker'' http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png<br>
+
'''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. <br>Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br>
 +
 
 
'''''Note #4''': ''You may need to put a non-zero WSC in the Coding screen, anything should work such as 12345.'' <br>
 
'''''Note #4''': ''You may need to put a non-zero WSC in the Coding screen, anything should work such as 12345.'' <br>
  
06639
+
'''06639''' is the Coding value needed for US Market with (PR-1P4/1LB)
US Market = (PR-1P4/1LB)
 
  
 
If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.
 
If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.
Line 27: Line 26:
  
 
'''''Note''': ''A successful calibration usually requires a correct coding, so make sure the control module is correctly coded first.''<br>
 
'''''Note''': ''A successful calibration usually requires a correct coding, so make sure the control module is correctly coded first.''<br>
 
'''[Select]'''<br>
 
'''[03 - ABS Brakes]'''<br>
 
 
'''[Fault Codes - 02]'''<br>
 
'''[Done, Go Back]'''<br>
 
  
 
Turn steering wheel at least 30 ° left and back straight ahead.<br>
 
Turn steering wheel at least 30 ° left and back straight ahead.<br>
Line 56: Line 49:
  
 
'''[Close Controller, Go Back - 06]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>
 +
 +
==== Note ====
 +
* After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal.  Please see [[01486]].
 +
* Tech Tip [45-07-19] exist because the factory scan tool apparently forgot how work with Transporters.
 +
** https://static.nhtsa.gov/odi/tsbs/2017/MC-10125590-9999.pdf  NHTSA

Latest revision as of 17:57, 18 March 2021

Login

Note #1: After Login has been carried out you need to recode the control module.
Note #2: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual.
Click here to see an Example of a Sticker.

07669 is the Login code needed for US Market with (PR-1P4/1LB)

If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.

Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual.
Click here to see an Example of a Sticker.

Note #4: You may need to put a non-zero WSC in the Coding screen, anything should work such as 12345.

06639 is the Coding value needed for US Market with (PR-1P4/1LB)

If your vehicle is not a US-market 24V VR6 Eurovan, then please email Support@Ross-Tech.com for additional choices.

Basic Setting

Steering Angle Sensor (G85) Calibration

Note: A successful calibration usually requires a correct coding, so make sure the control module is correctly coded first.

Turn steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Login - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]

Note