Difference between revisions of "Audi A4 (8E) Automatic Roof"

From Ross-Tech Wiki
Line 621: Line 621:
  
 
== Video Link ==
 
== Video Link ==
 +
=== A4 Top Operation ===
  
 
http://www.youtube.com/watch?v=Q_SumTD87lQ
 
http://www.youtube.com/watch?v=Q_SumTD87lQ
 +
 
* Note that this video will be replaced with a more detailed A4 Cabriolet Top Operation video.
 
* Note that this video will be replaced with a more detailed A4 Cabriolet Top Operation video.

Revision as of 16:12, 8 October 2012

Adaptation

Channel 01: Reset

Prerequisites:

  • Automatic Roof closed
  • Measuring Value Blocks (MVB) OK

To reset the switch positions, save a new value of 1.

Special Notes

  • If Adaptation will not set with only the 02000 fault present, check TSB 61-08-05 (2010940, NAR only)
  • If fault code 00003 - Control Module: Defective -or- Control Module: No or Incorrect Basic Setting / Adaptation will not clear after replacing the 26 module try locking the vehicle doors so the CAN Bus modules go into sleep mode. Upon waking back up, the internal CAN Bus modules on the Comfort Bus may begin to communicate properly.

Measuring Block Data

Reading Roof Electronics Switch Conditions, Electric Power Top Closed

Measuring Block Group 001 (Roof Closed)
Field 2 X Field 3 Data
1 1 0 1 1 0 1 0 1 0 X 1 0 1 0 F201
F290
F293
F200
X
Not used, always "0"
F292
X
F171
F202
F294
F295
F172
Switch Point for Bow UP
Switch Point for Bow OPEN
Switch Point for Bow DEAD CENTER


Reading Roof Electronics Switch Conditions, Electric Power Top Opened

Measuring Block Group 001 (Roof Opened)
Field 2 X Field 3 Data
0 0 1 0 1 0 0 1 1 0 X 1 0 1 0 F201
F290
F293
F200
X
Not used, always "0"
F292
X
F171
F202
F294
F295
F172
Switch Point for Bow UP
Switch Point for Bow OPEN
Switch Point for Bow DEAD CENTER


Video Link

A4 Top Operation

http://www.youtube.com/watch?v=Q_SumTD87lQ

  • Note that this video will be replaced with a more detailed A4 Cabriolet Top Operation video.