VW Passat (3C) Tire Pressure Monitoring: Difference between revisions
Table Of Contents
- 1. Coding
- 2. Security Access
-
3.
Adaptation
- 3.1.3 Channel 002: Wheel Set
- 4. Special Notes
No edit summary |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== Coding == | == Coding == | ||
'''2004 - 2009 Model Years''' | |||
* '''Rest of World (RoW)''': | * '''Rest of World (RoW)''': | ||
| Line 10: | Line 11: | ||
** 0100100 = Service (for manual input of specified pressure) | ** 0100100 = Service (for manual input of specified pressure) | ||
'''''Note''': When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels | '''2010 and newer''' vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and use Long Coding. The [http://www.ross-tech.com/vcds/tour/recode_screen.html#long '''[Long Coding Helper]]''' will provide the needed coding information if the original coding cannot be retrieved. | ||
'''''Note''': When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.'' | |||
| Line 22: | Line 26: | ||
=== Channel 002: Wheel Set === | === Channel 002: Wheel Set === | ||
Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1. | Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1. | ||
* Wheel set 2 would normally be winter or seasonal use wheels. | * Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled. | ||
=== Channel 005: Specified Tire Pressure at Full Load (Front Axle) === | === Channel 005: Specified Tire Pressure at Full Load (Front Axle) === | ||
| Line 35: | Line 39: | ||
=== Channel 008: Specified Tire Pressure at Partial Load (Rear Axle) === | === Channel 008: Specified Tire Pressure at Partial Load (Rear Axle) === | ||
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. | The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. | ||
== Special Notes == | |||
* The following Tech Tip will help explain this TPMS system: [[VW TPMS Systems without Wheel Position Recognition]] | |||
* When Direct TPMS is fault-free but the TPMS light is still illuminated in the instrument cluster make sure the 03-ABS control module does NOT have Indirect TPMS enabled at the same time. Having two different types of TPMS enabled at the same time will result in conflicts. | |||
Latest revision as of 14:20, 12 November 2025
Coding
2004 - 2009 Model Years
- Rest of World (RoW):
- 0161211 = Factory
- 0161210 = Service (for manual input of specified pressure)
- North America (NAR):
- 0100101 = Factory
- 0100100 = Service (for manual input of specified pressure)
2010 and newer vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and use Long Coding. The [Long Coding Helper] will provide the needed coding information if the original coding cannot be retrieved.
Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.
Security Access
- 01503 - General Adaptation "Enabling"
Adaptation
Channel 002: Wheel Set
Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.
- Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.
Channel 005: Specified Tire Pressure at Full Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 006: Specified Tire Pressure at Partial Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 007: Specified Tire Pressure at Full Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 008: Specified Tire Pressure at Partial Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Special Notes
- The following Tech Tip will help explain this TPMS system: VW TPMS Systems without Wheel Position Recognition
- When Direct TPMS is fault-free but the TPMS light is still illuminated in the instrument cluster make sure the 03-ABS control module does NOT have Indirect TPMS enabled at the same time. Having two different types of TPMS enabled at the same time will result in conflicts.
No categories.