Difference between revisions of "VW Passat (3C) Tire Pressure Monitoring"
RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == Coding == * '''Rest of World (RoW)''': ** 0161211 = Factory ** 0161210 = Service (for manual input of specified pressure) * '''North America (NAR)''': ** 0100101 = Factor...) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== Coding == | == Coding == | ||
| + | '''2004 - 2009 Model Years''' | ||
* '''Rest of World (RoW)''': | * '''Rest of World (RoW)''': | ||
| Line 10: | Line 11: | ||
** 0100100 = Service (for manual input of specified pressure) | ** 0100100 = Service (for manual input of specified pressure) | ||
| − | '''''Note''': When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels | + | '''2010 and newer''' vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and use Long Coding. The [http://www.ross-tech.com/vcds/tour/recode_screen.html#long '''[Long Coding Helper]]''' will provide the needed coding information if the original coding cannot be retrieved. |
| + | |||
| + | |||
| + | '''''Note''': When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.'' | ||
| Line 19: | Line 23: | ||
== Adaptation == | == Adaptation == | ||
| + | |||
| + | === Channel 002: Wheel Set === | ||
| + | Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1. | ||
| + | * Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled. | ||
| + | |||
=== Channel 005: Specified Tire Pressure at Full Load (Front Axle) === | === Channel 005: Specified Tire Pressure at Full Load (Front Axle) === | ||
| − | The specified tire pressure is | + | The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. |
=== Channel 006: Specified Tire Pressure at Partial Load (Front Axle) === | === Channel 006: Specified Tire Pressure at Partial Load (Front Axle) === | ||
| − | The specified tire pressure is | + | The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. |
=== Channel 007: Specified Tire Pressure at Full Load (Rear Axle) === | === Channel 007: Specified Tire Pressure at Full Load (Rear Axle) === | ||
| − | The specified tire pressure is | + | The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. |
=== Channel 008: Specified Tire Pressure at Partial Load (Rear Axle) === | === Channel 008: Specified Tire Pressure at Partial Load (Rear Axle) === | ||
| − | The specified tire pressure is | + | The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24. |
| + | |||
| + | |||
| + | |||
| + | == Special Notes == | ||
| + | |||
| + | The following Tech Tip will help explain this TPMS system: | ||
| + | [[VW TPMS Systems without Wheel Position Recognition]] | ||
Latest revision as of 10:06, 15 May 2012
Coding
2004 - 2009 Model Years
- Rest of World (RoW):
- 0161211 = Factory
- 0161210 = Service (for manual input of specified pressure)
- North America (NAR):
- 0100101 = Factory
- 0100100 = Service (for manual input of specified pressure)
2010 and newer vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and use Long Coding. The [Long Coding Helper] will provide the needed coding information if the original coding cannot be retrieved.
Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.
Security Access
- 01503 - General Adaptation "Enabling"
Adaptation
Channel 002: Wheel Set
Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.
- Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.
Channel 005: Specified Tire Pressure at Full Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 006: Specified Tire Pressure at Partial Load (Front Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 007: Specified Tire Pressure at Full Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Channel 008: Specified Tire Pressure at Partial Load (Rear Axle)
The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.
Special Notes
The following Tech Tip will help explain this TPMS system: VW TPMS Systems without Wheel Position Recognition